12. Seismic wavefield decomposition

Multi-component seismic data can be decomposed in their up- and down-going constituents. This task can be accurately achieved by linearly combining the input pressure and particle velocity data in the frequency-wavenumber described in details in pylops.waveeqprocessing.UpDownComposition2D and pylops.waveeqprocessing.WavefieldDecomposition.

In this tutorial we will consider a simple synthetic data composed of six events (three up-going and three down-going). We will first combine them to create pressure and particle velocity data and then show how we can retrieve their directional constituents both by directly combining the input data as well as by setting an inverse problem. The latter approach results vital in case of spatial aliasing, as applying simple scaled summation in the frequency-wavenumber would result in sub-optimal decomposition due to the superposition of different frequency-wavenumber pairs at some (aliased) locations.

import numpy as np
import matplotlib.pyplot as plt
from scipy.signal import filtfilt

import pylops
from pylops.utils.wavelets import ricker
from pylops.utils.seismicevents import makeaxis, hyperbolic2d

np.random.seed(0)
plt.close('all')

Let’s first the input up- and down-going wavefields

par = {'ox':-220, 'dx':5, 'nx':89,
       'ot':0, 'dt':0.004, 'nt':200,
       'f0': 40}

t0_plus = np.array([0.2, 0.5, 0.7])
t0_minus = t0_plus + 0.04
vrms = np.array([1400., 1500., 2000.])
amp = np.array([1., -0.6, 0.5])
vel_sep = 1000.0 # velocity at separation level
rho_sep = 1000.0 # density at separation level

# Create axis
t, t2, x, y = makeaxis(par)

# Create wavelet
wav = ricker(t[:41], f0=par['f0'])[0]

# Create data
_, p_minus = hyperbolic2d(x, t, t0_minus, vrms, amp, wav)
_, p_plus = hyperbolic2d(x, t, t0_plus, vrms, amp, wav)

We can now combine them to create pressure and particle velocity data

critical = 1.1
ntaper = 51
nfft = 2**10

# 2d fft operator
FFTop = pylops.signalprocessing.FFT2D(dims=[par['nx'], par['nt']],
                                      nffts=[nfft, nfft],
                                      sampling=[par['dx'], par['dt']])

#obliquity factor
[Kx, F] = np.meshgrid(FFTop.f1, FFTop.f2, indexing='ij')
k = F/vel_sep
Kz = np.sqrt((k**2-Kx**2).astype(np.complex))
Kz[np.isnan(Kz)] = 0
OBL = rho_sep*(np.abs(F)/Kz)
OBL[Kz == 0] = 0

mask = np.abs(Kx) < critical*np.abs(F)/vel_sep
OBL *= mask
OBL = filtfilt(np.ones(ntaper)/float(ntaper), 1, OBL, axis=0)
OBL = filtfilt(np.ones(ntaper)/float(ntaper), 1, OBL, axis=1)

# composition operator
UPop = \
    pylops.waveeqprocessing.UpDownComposition2D(par['nt'], par['nx'],
                                                par['dt'], par['dx'],
                                                rho_sep, vel_sep,
                                                nffts=(nfft, nfft),
                                                critical=critical*100.,
                                                ntaper=ntaper,
                                                dtype='complex128')

# wavefield modelling
d = UPop * np.concatenate((p_plus.flatten(), p_minus.flatten())).flatten()
d = np.real(d.reshape(2*par['nx'], par['nt']))
p, vz = d[:par['nx']], d[par['nx']:]

# obliquity scaled vz
VZ = FFTop * vz.flatten()
VZ = VZ.reshape(nfft, nfft)

VZ_obl = OBL * VZ
vz_obl = FFTop.H*VZ_obl.flatten()
vz_obl = np.real(vz_obl.reshape(par['nx'], par['nt']))

fig, axs = plt.subplots(1, 4, figsize=(10, 5))
axs[0].imshow(p.T, aspect='auto', vmin=-1, vmax=1,
              interpolation='nearest', cmap='gray',
              extent=(x.min(), x.max(), t.max(), t.min()))
axs[0].set_title(r'$p$', fontsize=15)
axs[0].set_xlabel('x')
axs[0].set_ylabel('t')
axs[1].imshow(vz_obl.T, aspect='auto', vmin=-1, vmax=1,
              interpolation='nearest', cmap='gray',
              extent=(x.min(), x.max(), t.max(), t.min()))
axs[1].set_title(r'$v_z^{obl}$', fontsize=15)
axs[1].set_xlabel('x')
axs[1].set_ylabel('t')
axs[2].imshow(p_plus.T, aspect='auto', vmin=-1, vmax=1,
              interpolation='nearest', cmap='gray',
              extent=(x.min(), x.max(), t.max(), t.min()))
axs[2].set_title(r'$p^+$', fontsize=15)
axs[2].set_xlabel('x')
axs[2].set_ylabel('t')
axs[3].imshow(p_minus.T, aspect='auto',
              interpolation='nearest', cmap='gray',
              extent=(x.min(), x.max(), t.max(), t.min()),
              vmin=-1, vmax=1)
axs[3].set_title(r'$p^-$', fontsize=15)
axs[3].set_xlabel('x')
axs[3].set_ylabel('t')
plt.tight_layout()
../_images/sphx_glr_wavefielddecomposition_001.png

Wavefield separation is first performed using the analytical expression for combining pressure and particle velocity data in the wavenumber-frequency domain

pup_sep, pdown_sep = \
    pylops.waveeqprocessing.WavefieldDecomposition(p, vz, par['nt'], par['nx'],
                                                   par['dt'], par['dx'],
                                                   rho_sep, vel_sep,
                                                   nffts=(nfft, nfft),
                                                   kind='analytical',
                                                   critical=critical*100,
                                                   ntaper=ntaper,
                                                   dtype='complex128')
fig = plt.figure(figsize=(12, 5))
axs0 = plt.subplot2grid((2, 5), (0, 0), rowspan=2)
axs1 = plt.subplot2grid((2, 5), (0, 1), rowspan=2)
axs2 = plt.subplot2grid((2, 5), (0, 2), colspan=3)
axs3 = plt.subplot2grid((2, 5), (1, 2), colspan=3)
axs0.imshow(pup_sep.T, cmap='gray', vmin=-1, vmax=1,
            extent=(x.min(), x.max(), t.max(), t.min()))
axs0.set_title(r'$p^-$ analytical')
axs0.axis('tight')
axs1.imshow(pdown_sep.T, cmap='gray', vmin=-1, vmax=1,
            extent=(x.min(), x.max(), t.max(), t.min()))
axs1.set_title(r'$p^+$ analytical')
axs1.axis('tight')
axs2.plot(t, p[par['nx']//2], 'r', lw=2, label=r'$p$')
axs2.plot(t, vz_obl[par['nx']//2], '--b', lw=2, label=r'$v_z^{obl}$')
axs2.set_ylim(-1, 1)
axs2.set_title('Data at x=%.2f' % x[par['nx']//2])
axs2.set_xlabel('t [s]')
axs2.legend()
axs3.plot(t, pup_sep[par['nx']//2], 'r', lw=2, label=r'$p^-$ ana')
axs3.plot(t, pdown_sep[par['nx']//2], '--b', lw=2, label=r'$p^+$ ana')
axs3.set_title('Separated wavefields at x=%.2f' % x[par['nx']//2])
axs3.set_xlabel('t [s]')
axs3.set_ylim(-1, 1)
axs3.legend()
plt.tight_layout()
../_images/sphx_glr_wavefielddecomposition_002.png

We repeat the same exercise but this time we invert the composition operator pylops.waveeqprocessing.UpDownComposition2D

pup_inv, pdown_inv = \
    pylops.waveeqprocessing.WavefieldDecomposition(p, vz, par['nt'], par['nx'],
                                                   par['dt'], par['dx'],
                                                   rho_sep, vel_sep,
                                                   nffts=(nfft, nfft),
                                                   kind='inverse',
                                                   critical=critical*100,
                                                   ntaper=ntaper,
                                                   dtype='complex128',
                                                   **dict(damp=1e-10,
                                                          iter_lim=20))

fig = plt.figure(figsize=(12, 5))
axs0 = plt.subplot2grid((2, 5), (0, 0), rowspan=2)
axs1 = plt.subplot2grid((2, 5), (0, 1), rowspan=2)
axs2 = plt.subplot2grid((2, 5), (0, 2), colspan=3)
axs3 = plt.subplot2grid((2, 5), (1, 2), colspan=3)
axs0.imshow(pup_inv.T, cmap='gray', vmin=-1, vmax=1,
            extent=(x.min(), x.max(), t.max(), t.min()))
axs0.set_title(r'$p^-$ inverse')
axs0.axis('tight')
axs1.imshow(pdown_inv.T, cmap='gray', vmin=-1, vmax=1,
            extent=(x.min(), x.max(), t.max(), t.min()))
axs1.set_title(r'$p^+$ inverse')
axs1.axis('tight')
axs2.plot(t, p[par['nx']//2], 'r', lw=2, label=r'$p$')
axs2.plot(t, vz_obl[par['nx']//2], '--b', lw=2, label=r'$v_z^{obl}$')
axs2.set_ylim(-1, 1)
axs2.set_title('Data at x=%.2f' % x[par['nx']//2])
axs2.set_xlabel('t [s]')
axs2.legend()
axs3.plot(t, pup_inv[par['nx']//2], 'r', lw=2, label=r'$p^-$ inv')
axs3.plot(t, pdown_inv[par['nx']//2], '--b', lw=2, label=r'$p^+$ inv')
axs3.set_title('Separated wavefields at x=%.2f' % x[par['nx']//2])
axs3.set_xlabel('t [s]')
axs3.set_ylim(-1, 1)
axs3.legend()
plt.tight_layout()
../_images/sphx_glr_wavefielddecomposition_003.png

The up- and down-going constituents have been succesfully separated in both cases. Finally, we use the pylops.waveeqprocessing.UpDownComposition2D operator to reconstruct the particle velocity wavefield from its up- and down-going pressure constituents

PtoVop = \
    pylops.waveeqprocessing.PressureToVelocity(par['nt'], par['nx'],
                                               par['dt'], par['dx'],
                                               rho_sep, vel_sep,
                                               nffts=(nfft, nfft),
                                               critical=critical * 100.,
                                               ntaper=ntaper,
                                               topressure=False)

vdown_rec = (PtoVop * pdown_inv.ravel()).reshape(par['nx'], par['nt'])
vup_rec = (PtoVop * pup_inv.ravel()).reshape(par['nx'], par['nt'])
vz_rec = np.real(vdown_rec - vup_rec)

fig, axs = plt.subplots(1, 3, figsize=(13, 6))
axs[0].imshow(vz.T, cmap='gray', vmin=-1e-6, vmax=1e-6,
              extent=(x.min(), x.max(), t.max(), t.min()))
axs[0].set_title(r'$vz$')
axs[0].axis('tight')
axs[1].imshow(vz_rec.T, cmap='gray', vmin=-1e-6, vmax=1e-6,
              extent=(x.min(), x.max(), t[-1], t[0]))
axs[1].set_title(r'$vz rec$')
axs[1].axis('tight')
axs[2].imshow(vz.T - vz_rec.T, cmap='gray', vmin=-1e-6, vmax=1e-6,
              extent=(x.min(), x.max(), t[-1], t[0]))
axs[2].set_title(r'$error$')
axs[2].axis('tight')
../_images/sphx_glr_wavefielddecomposition_004.png

Out:

(-220.0, 220.0, 0.796, 0.0)

To see more examples, including applying wavefield separation and regularization simultaneously, head over to these companion notebooks: notebook1 and notebook2

Total running time of the script: ( 0 minutes 26.428 seconds)

Gallery generated by Sphinx-Gallery