Note

Click here to download the full example code

# Normal Moveout (NMO) Correction¶

This example shows how to create your own operator for performing
normal moveout (NMO) correction to a seismic record.
We will perform classic NMO using an operator created from scratch,
as well as using the `pylops.Spread`

operator.

```
from math import floor
from time import time
import matplotlib.pyplot as plt
import numpy as np
from mpl_toolkits.axes_grid1 import ImageGrid, make_axes_locatable
from numba import jit, prange
from scipy.interpolate import griddata
from scipy.ndimage import gaussian_filter
from pylops import LinearOperator, Spread
from pylops.utils import dottest
from pylops.utils.seismicevents import hyperbolic2d, makeaxis
from pylops.utils.wavelets import ricker
def create_colorbar(im, ax):
divider = make_axes_locatable(ax)
cax = divider.append_axes("right", size="5%", pad=0.1)
cb = fig.colorbar(im, cax=cax, orientation="vertical")
return cax, cb
```

Given a common-shot or common-midpoint (CMP) record, the objective of NMO correction is to “flatten” events, that is, align events at later offsets to that of the zero offset. NMO has long been a staple of seismic data processing, used even today for initial velocity analysis and QC purposes. In addition, it can be the domain of choice for many useful processing steps, such as angle muting.

To get started, let us create a 2D seismic dataset containing some hyperbolic events representing reflections from flat reflectors. Events are created with a true RMS velocity, which we will be using as if we picked them from, for example, a semblance panel.

```
par = dict(ox=0, dx=40, nx=80, ot=0, dt=0.004, nt=520)
t, _, x, _ = makeaxis(par)
t0s_true = np.array([0.5, 1.22, 1.65])
vrms_true = np.array([2000.0, 2400.0, 2500.0])
amps = np.array([1, 0.2, 0.5])
freq = 10 # Hz
wav, *_ = ricker(t[:41], f0=freq)
_, data = hyperbolic2d(x, t, t0s_true, vrms_true, amp=amps, wav=wav)
```

```
# NMO correction plot
pclip = 0.5
dmax = np.max(np.abs(data))
opts = dict(
cmap="gray_r",
extent=[x[0], x[-1], t[-1], t[0]],
aspect="auto",
vmin=-pclip * dmax,
vmax=pclip * dmax,
)
# Offset-dependent traveltime of the first hyperbolic event
t_nmo_ev1 = np.sqrt(t0s_true[0] ** 2 + (x / vrms_true[0]) ** 2)
fig, ax = plt.subplots(figsize=(4, 5))
vmax = np.max(np.abs(data))
im = ax.imshow(data.T, **opts)
ax.plot(x, t_nmo_ev1, "C1--", label="Hyperbolic moveout")
ax.plot(x, t0s_true[0] + x * 0, "C1", label="NMO-corrected")
idx = 3 * par["nx"] // 4
ax.annotate(
"",
xy=(x[idx], t0s_true[0]),
xycoords="data",
xytext=(x[idx], t_nmo_ev1[idx]),
textcoords="data",
fontsize=7,
arrowprops=dict(edgecolor="w", arrowstyle="->", shrinkA=10),
)
ax.set(title="Data", xlabel="Offset [m]", ylabel="Time [s]")
cax, _ = create_colorbar(im, ax)
cax.set_ylabel("Amplitude")
ax.legend()
fig.tight_layout()
```

NMO correction consists of applying an offset- and time-dependent shift to each sample of the trace in such a way that all events corresponding to the same reflection will be located at the same time intercept after correction.

An arbitrary hyperbolic event at position \((t, h)\) is linked to its zero-offset traveltime \(t_0\) by the following equation

Our strategy in applying the correction is to loop over our time axis (which we will associate to \(t_0\)) and respective RMS velocities and, for each offset, move the sample at \(t(x)\) to location \(t_0(x) \equiv t_0\). In the figure above, we are considering a single \(t_0 = 0.5\mathrm{s}\) which would have values along the dotted curve (i.e., \(t(x)\)) moved to \(t_0\) for every offset.

Notice that we need NMO velocities for each sample of our time axis.
In this example, we actually only have 3 samples, when we need `nt`

samples.
In practice, we would have many more samples, but probably not one for each
`nt`

. To resolve this issue, we will interpolate these 3 samples to all samples
of our time axis (or, more accurately, their slownesses to preserve traveltimes).

```
def interpolate_vrms(t0_picks, vrms_picks, taxis, smooth=None):
assert len(t0_picks) == len(vrms_picks)
# Sampled points in time axis
points = np.zeros((len(t0_picks) + 2,))
points[0] = taxis[0]
points[-1] = taxis[-1]
points[1:-1] = t0_picks
# Sampled values of slowness (in s/km)
values = np.zeros((len(vrms_picks) + 2,))
values[0] = 1000.0 / vrms_picks[0] # Use first slowness before t0_picks[0]
values[-1] = 1000.0 / vrms_picks[-1] # Use the last slowness after t0_picks[-1]
values[1:-1] = 1000.0 / vrms_picks
slowness = griddata(points, values, taxis, method="linear")
if smooth is not None:
slowness = gaussian_filter(slowness, sigma=smooth)
return 1000.0 / slowness
vel_t = interpolate_vrms(t0s_true, vrms_true, t, smooth=11)
```

```
# Plot interpolated RMS velocities which will be used for NMO
fig, ax = plt.subplots(figsize=(4, 5))
ax.plot(vel_t, t, "k", lw=3, label="Interpolated", zorder=-1)
ax.plot(vrms_true, t0s_true, "C1o", markersize=10, label="Picks")
ax.invert_yaxis()
ax.set(xlabel="RMS Velocity [m/s]", ylabel="Time [s]", ylim=[t[-1], t[0]])
ax.legend()
fig.tight_layout()
```

## NMO from scratch¶

We are very close to building our NMO correction, we just need to take care of
one final issue. When moving the sample from \(t(x)\) to \(t_0\), we
know that, by definition, \(t_0\) is always on our time axis grid. In contrast,
\(t(x)\) may not fall exactly on a multiple of `dt`

(our time axis
sampling). Suppose its nearest sample smaller than itself (floor) is `i`

.
Instead of moving only sample i, we will be moving samples both samples
`i`

and `i+1`

with an appropriate weight to account for how far
\(t(x)\) is from `i*dt`

and `(i+1)*dt`

.

```
@jit(nopython=True, fastmath=True, nogil=True, parallel=True)
def nmo_forward(data, taxis, haxis, vels_rms):
dt = taxis[1] - taxis[0]
ot = taxis[0]
nt = len(taxis)
nh = len(haxis)
dnmo = np.zeros_like(data)
# Parallel outer loop on slow axis
for ih in prange(nh):
h = haxis[ih]
for it0, (t0, vrms) in enumerate(zip(taxis, vels_rms)):
# Compute NMO traveltime
tx = np.sqrt(t0 ** 2 + (h / vrms) ** 2)
it_frac = (tx - ot) / dt # Fractional index
it_floor = floor(it_frac)
it_ceil = it_floor + 1
w = it_frac - it_floor
if 0 <= it_floor and it_ceil < nt: # it_floor and it_ceil must be valid
# Linear interpolation
dnmo[ih, it0] += (1 - w) * data[ih, it_floor] + w * data[ih, it_ceil]
return dnmo
dnmo = nmo_forward(data, t, x, vel_t) # Compile and run
# Time execution
start = time()
nmo_forward(data, t, x, vel_t)
end = time()
print(f"Ran in {1e6*(end-start):.0f} μs")
```

Out:

```
Ran in 321 μs
```

```
# Plot Data and NMO-corrected data
fig = plt.figure(figsize=(6.5, 5))
grid = ImageGrid(
fig,
111,
nrows_ncols=(1, 2),
axes_pad=0.15,
cbar_location="right",
cbar_mode="single",
cbar_size="7%",
cbar_pad=0.15,
aspect=False,
share_all=True,
)
im = grid[0].imshow(data.T, **opts)
grid[0].set(title="Data", xlabel="Offset [m]", ylabel="Time [s]")
grid[0].cax.colorbar(im)
grid[0].cax.set_ylabel("Amplitude")
grid[1].imshow(dnmo.T, **opts)
grid[1].set(title="NMO-corrected Data", xlabel="Offset [m]")
plt.show()
```

Now that we know how to compute the forward, we’ll compute the adjoint pass.
With these two functions, we can create a `LinearOperator`

and ensure that
it passes the dot-test.

```
@jit(nopython=True, fastmath=True, nogil=True, parallel=True)
def nmo_adjoint(dnmo, taxis, haxis, vels_rms):
dt = taxis[1] - taxis[0]
ot = taxis[0]
nt = len(taxis)
nh = len(haxis)
data = np.zeros_like(dnmo)
# Parallel outer loop on slow axis; use range if Numba is not installed
for ih in prange(nh):
h = haxis[ih]
for it0, (t0, vrms) in enumerate(zip(taxis, vels_rms)):
# Compute NMO traveltime
tx = np.sqrt(t0 ** 2 + (h / vrms) ** 2)
it_frac = (tx - ot) / dt # Fractional index
it_floor = floor(it_frac)
it_ceil = it_floor + 1
w = it_frac - it_floor
if 0 <= it_floor and it_ceil < nt:
# Linear interpolation
# In the adjoint, we must spread the same it0 to both it_floor and
# it_ceil, since in the forward pass, both of these samples were
# pushed onto it0
data[ih, it_floor] += (1 - w) * dnmo[ih, it0]
data[ih, it_ceil] += w * dnmo[ih, it0]
return data
```

Finally, we can create our linear operator. To exemplify the
class-based interface we will subclass `pylops.LinearOperator`

and
implement the required methods: `_matvec`

which will compute the forward and
`_rmatvec`

which will compute the adjoint.

```
class NMO(LinearOperator):
def __init__(self, taxis, haxis, vels_rms, dtype=None):
self.taxis = taxis
self.haxis = haxis
self.vels_rms = vels_rms
self.dims = (len(haxis), len(taxis))
# Required LinearOperator attributes
self.explicit = False
self.shape = (np.prod(self.dims),) * 2
argdtypes = np.result_type(taxis.dtype, haxis.dtype, vels_rms.dtype)
self.dtype = argdtypes if dtype is None else dtype
self.clinear = False
def _matvec(self, x):
y = nmo_forward(x.reshape(self.dims), self.taxis, self.haxis, self.vels_rms)
y = y.ravel()
return y
def _rmatvec(self, y):
x = nmo_adjoint(y.reshape(self.dims), self.taxis, self.haxis, self.vels_rms)
x = x.ravel()
return x
```

With our new `NMO`

linear operator, we can instantiate it with our current
example and ensure that it passes the dot test which proves that our forward
and adjoint transforms truly are adjoints of each other.

Out:

```
True
```

## NMO using `pylops.Spread`

¶

We learned how to implement an NMO correction and its adjoint from scratch. The adjoint has an interesting pattern, where energy taken from one domain is “spread” along a previously-defined parametric curve (the NMO hyperbola in this case). This pattern is very common in many algorithms, including Radon transform, Kirchhoff migration (also known as Total Focusing Method in ultrasonics) and many others.

For these classes of operators, PyLops offers a `pylops.Spread`

constructor, which we will leverage to implement a version of the NMO correction.
The `pylops.Spread`

operator will take a value in the “input” domain,
and spread it along a parametric curve, defined in the “output” domain.
In our case, the spreading operation is the *adjoint* of the NMO, so our
“input” domain is the NMO domain, and the “output” domain is the original
data domain.

In order to use `pylops.Spread`

, we need to define the
parametric curves. This can be done through the use of a table with shape
\((n_{x_i}, n_{t}, n_{x_o})\), where \(n_{x_i}\) and \(n_{t}\)
represent the 2d dimensions of the “input” domain (NMO domain) and \(n_{x_o}\)
and \(n_{t}\) the 2d dimensions of the “output” domain. In our NMO case,
\(n_{x_i} = n_{x_o} = n_h\) represents the number of offsets.
Following the documentation of `pylops.Spread`

, the table will be
used in the following manner:

`d_out[ix_o, table[ix_i, it, ix_o]] += d_in[ix_i, it]`

In our case, `ix_o = ix_i = ih`

, and comparing with our NMO adjoint, `it`

refers to \(t_0\) while `table[ix, it, ix]`

should then provide the
appropriate index for \(t(x)\). In our implementation we will also be
constructing a second table containing the weights to be used for linear
interpolation.

```
def create_tables(taxis, haxis, vels_rms):
dt = taxis[1] - taxis[0]
ot = taxis[0]
nt = len(taxis)
nh = len(haxis)
# NaN values will be not be spread.
# Using np.zeros has the same result but much slower.
table = np.full((nh, nt, nh), fill_value=np.nan)
dtable = np.full((nh, nt, nh), fill_value=np.nan)
for ih, h in enumerate(haxis):
for it0, (t0, vrms) in enumerate(zip(taxis, vels_rms)):
# Compute NMO traveltime
tx = np.sqrt(t0 ** 2 + (h / vrms) ** 2)
it_frac = (tx - ot) / dt
it_floor = floor(it_frac)
w = it_frac - it_floor
# Both it_floor and it_floor + 1 must be valid indices for taxis
# when using two tables (interpolation).
if 0 <= it_floor and it_floor + 1 < nt:
table[ih, it0, ih] = it_floor
dtable[ih, it0, ih] = w
return table, dtable
nmo_table, nmo_dtable = create_tables(t, x, vel_t)
```

```
SpreadNMO = Spread(
data.shape, # "Input" shape: NMO-ed data shape
data.shape, # "Output" shape: original data shape
table=nmo_table, # Table of time indices
dtable=nmo_dtable, # Table of weights for linear interpolation
engine="numba", # numba or numpy
).H # To perform NMO *correction*, we need the adjoint
dottest(SpreadNMO, *SpreadNMO.shape, tol=1e-4)
```

Out:

```
True
```

We see it passes the dot test, but are the results right? Let’s find out.

Out:

```
Ran in 14987 μs
```

```
# Plot Data and NMO-corrected data
fig = plt.figure(figsize=(6.5, 5))
grid = ImageGrid(
fig,
111,
nrows_ncols=(1, 2),
axes_pad=0.15,
cbar_location="right",
cbar_mode="single",
cbar_size="7%",
cbar_pad=0.15,
aspect=False,
share_all=True,
)
im = grid[0].imshow(data.T, **opts)
grid[0].set(title="Data", xlabel="Offset [m]", ylabel="Time [s]")
grid[0].cax.colorbar(im)
grid[0].cax.set_ylabel("Amplitude")
grid[1].imshow(dnmo_spr.T, **opts)
grid[1].set(title="NMO correction using Spread", xlabel="Offset [m]")
plt.show()
```

Not as blazing fast as out original implementation, but pretty good (try the
“numpy” backend for comparison!). In fact, using the `Spread`

operator for
NMO will always have a speed disadvantage. While iterating over the table, it must
loop over the offsets twice: one for the “input” offsets and one for the “output”
offsets. We know they are the same for NMO, but since `Spread`

is a generic
operator, it does not know that. So right off the bat we can expect an 80x
slowdown (nh = 80). We diminished this cost to about 30x by setting values where
`ix_i != ix_o`

to NaN, but nothing beats the custom implementation. Despite this,
we can still produce the same result to numerical accuracy:

Out:

```
True
```

**Total running time of the script:** ( 0 minutes 4.280 seconds)